Product Description
Fuel Pressure Regulator Kit (1-4 PSI) KIT-1037
Brand- Holley
Fuel pressure regulator kit includes:
- fuel pressure gauge,
- brass fitting to connect fuel line to regulator
- brass bushing to connect gauge to regulator.
- fuel line and hose clamps to complete the installation.
Kit is designed for Weber carburetors that only require 3 LBS of fuel pressure to operate properly. Excess fuel pressure with cause over fueling, fuel wash, and other problems shortening the life of your engine, this is why Weber makes this note bold in the install instructions. Fuel pressure regulator needs to be mounded at same level as carburetor.
Features:
- Adjustable fuel regulation from 1 to 4 psi
- .220" (7/32") restriction
- 3/8" NPT ports ( 1 in, 2 out)
- Chrome finish
- Mounting bracket included
- Pre-set at 2.8 PSI
Product Videos
Custom Field
Product Reviews
12 Reviews Hide Reviews Show Reviews
-
Complete, and it works great.
This kit came with everything except the Teflon tape. All the fasteners, mounts, brackets, and hose clamps were provided within the kit. I set the fuel pressure at about 2.5 psi on the gauge. It cured the suspected leak by on the twin Dellortos. It idles and runs WAY better now. My 1968 Ford Cortina has not run this well in a while. This was not the first fuel pressure regulator I tried. It is the one that worked though. Thanks for the complete and thoughtfully prepared kit.
-
Nice little kit
This is a nice kit of parts. Not only "Toyo", but rather universal - for all carbs that need low pressure..
-
fuel pressure regulator
Item installed easily mine went on a jeep cj5 so there could have been some extra line included, but I am sure this kit was made for another application. As far as operation the Holley regulator hold high reviews and that stands with me just set it and forget it and my Weber carb is very happy now.
