Sequoia Lift- Toyota Sequoia 2.5" Bilstein Lift Kit (2000-2007) Kit-3000

If you are looking to lift your Toyota Sequoia this kit will fit 2000-2007 models.  The rear is lifted by replacing the factory height rear coil springs with ARB Medium Duty 2.5″ Lift coils.  We replace the factory rear shocks with Bilstein 5100 series lift shocks.  

Rear Coil Spring Tech Note: US car applications, "B" spring goes on driver's side. "A" spring goes on passenger side.

The front of your sequoia is lifted with a set of 5100 Bilstein Series Ride Height Adjustable Shock Absorbers.  These can be adjusted from 0" to 3" of lift with the use of your factory front coil springs.  The front differential is lowered with a diff drop kit to keep CV Axle angles close to factory angle and save CV boots from wear.

This lift kit includes- 

• (1) Front Differential Drop Kit
• (2) ARB Medium Duty 2.5″ Lift Coils
• (2) Bilstein 5100 Series Rear Lift Shocks
• (2) 5100 Bilstein Series Ride Height Adjustable Shock Absorbers

*NOTE- If your Sequoia has the rear air ride height adjustable suspension this kit will not work with your factory rear setup. This kit would require removal of the air ride adjustable suspension and switching it to a coil spring setup. This is fully doable with the purchase of a rear coil spring isolator, removal of the air bags and remove the compressor relay.

Fitment Guide-