Product Description
Toyota Off Road Vehicle Differential Breather Extension (1979-2021) KIT-1012
This product is ideal for off road vehicles to keep the breather cap above water level during river crossing and while off road driving.
This kit uses OEM breather and union to extended the breather away from differential.
Includes 6ft of hose to extend the breather to fuel door or underside of bed.
Option 8 ft upgrade- 8 Foot length option for lifted vehicles and enough length to run it up into the taillight area.
Kit includes
- 6ft of hose (8 ft with option)
- OEM breather
- OEM union
- Hose Clamp
| Make | Model | Year | Axle |
| Toyota | Pickup Truck | 1979-1995 | Front and Rear |
| Toyota | Tacoma | 1996-2021 | Rear |
| Toyota | 4Runner | 1984-1995 | Front and Rear |
| Toyota | 4Runner | 1996-2021 | Rear |
| Toyota | Tundra | 1999-2021 | Rear |
| Toyota | FJ Cruiser | 2007+ | Rear |
| Toyota | FJ40 Series Land Cruiser | Front | |
| Toyota | FJ60 Series Land Cruiser | Front and Rear | |
| Toyota | FJ80 Series Land Cruiser | Front and Rear | |
| Toyota | 100 Series Land Cruiser | Rear | |
| Toyota | 200 Series Land Cruiser | Rear |
Product Videos
Custom Field
Product Reviews
71 Reviews Hide Reviews Show Reviews
-
Super easy install
Product was incredibly easy to install, all of 5 min and the most basic of hand tools to do. More than enough hose to place where you'd like. Definitely feel more comfortable in any sort of water crossing after putting this in.
-
Great Price
I constantly submerge my rear axle when I launch my boat. I have been meaning to do the rear diff breather mod for a while. Yotashop's diff breather mod kit was a excellent solution for a great price!
-
Works great
I routed it up through the gas cap area on my 02 toyota 4runner with a 3inch lift and 33s. The length of the hose seemed a little long so I trimmed it. But I would rather have a longer hose to adjust how you would like it than it being too short. I used zip ties to hold the hose in place all the way up through the gas cap. Tested it off roading this weekend and everything works fine
-
Perfect
Perfect for letting the rear diff in my Tacoma breathe. All parts were included and worked perfectly! Easy mod!
-
Great Folks
Excellent kit as advertised. These folks are the real deal...
-
No complaints
Received exactly what’s stated, install was a quick and easy 15min. Hose was perfect length for my needs and I’m running a 3” lift with 33” tires. The breather was routed behind my driver tail light. Only complaint is the hose clamp size, the one I received was slightly too big so I had to use my own.
-
Too Short
I have a 6"lift lift, could have used a bit more hose, so beware if you have a lift. Barely made it into my taillight. Also would of been nice to come with a hose clamp for connecting to the diff. I had one in my garage that was a little bit to big but made it work. Didn't use one on the other end, don't think it is necessary. Throw in 3 or 4 zip ties would be nice also. Then kit would have been complete. So I say charge an extra couple bucks if need be, add hose clamps, extra 6" or so of hose, and a few zip ties, and save people the headache of digging through the garage or running to the hardware store. I will actually end up redoing mine because I ain't really satisfied with the end result! :(
-
perfect
Fit perfectly and all I had to do was drill my hole and zip the tie it off. Quick and easy installation.
