Product Description
Body Lift- Toyota Pickup Truck 3/8" Body Lift Commonly Used for 3.4L 5VZ Engine Swap (1989-1995) Kit-1038
Are you doing a 5VZ swap into a 3rd gen 1989-1995 Pickup and don't want to cut your hood or install a big body lift then we have a solution for you. Until now you were stuck with a 1" body lift or a hood scoop. This kit is used to fit a 3.4L 5VZ into a 1989-1995 Toyota Pickup Truck using a 3/8" body lift for hood clearance. With our 3/8" Body lift you can still use your stock hardware. Using this 3/8" body lift you do not have to cut the hood or hood bracing. Must use the factory 3VZ motor mount brackets. This also maintains a factory appearance by avoiding a 1" body lift.
Kit includes
- 10x 2" OD pucks for bed and front of truck
- 4x 2.5" OD Pucks for Cab
Pucks are made from polyethylene
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Fits pretty good!
Fits a 94 2wd ext cab pickup, only light modifications required. Some of the inner hole diameters are too small on the smaller pucks but easy enough to drill out to size. May need to use different washers on the two front larger cab mount bolts. Other than that, no mods needed for PWS or anything else, will leave another review after 3.4 swap completed
