Product Description
Manifold Gasket- Toyota 22R, 22RE Remflex Hi-Crush Exhaust Manifold Gasket (1985-1995) 7010
Seal warped manifold surfaces with RemFlex hi crush exhaust manifold gasket.
1-11/32" x 1-25/32" Egg Shaped Port Includes EGR and Air Tube Gaskets.
(EGR gaskets- Part "b" (2/ea) & Part "c" (1/ea), and Air-Tube gasket - Part "d" (2/ea) included)
Suggested Torque
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
- Suggested Torque: 20 Ft Lbs.
1.) DO NOT BEND! Remflex gaskets are designed to withstand clamping force and incredible heat, but not bending.
If you bend them, they will break!
2.) Do not over tighten. When properly installed the flange should be tightened evenly - See the suggested torque range.
3.) Longer bolts aren't necessary. Though Remflex are thicker than other gaskets, standard length bolts will work fine.
4.) Do not use sealers. Silicone and other sealers cannot withstand the same temperature as Remflex gaskets, and can actually cause leaks.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
gaskets
The gaskets are of the best quality and seals the exhaust manifold no matter what imperfections are present in the manifold and head surface. Awesome will buy again.
